Mixers Grinders

Installation and service available on all of the equipment below.

Hollymatic 175 Mixer Grinder from Horizon Bradco Commercial Food Service EquipmentHollymatic 175 and 180A Mixer/Grinders

Hollymatic, the inventor of the Mixer/Grinder, offers two powerhouse models to further process a variety of meat products: the 175 and 180A Mixer/Grinders. Both units provide high production, superior mixing capabilities and an easy to clean design. Reduce your risk of cross-species contamination with Hollymatic’s quick and easy to clean Mixer/Grinders. The 175 Mixer/Grinder has a 150 pound capacity hopper that tilts or is removable for easy cleaning. The 180A Mixer/Grinder hopper can hold up to 225 pounds of product and tilts for cleaning ease. With one tool, the mixing paddle, grinding head and feed screw can be removed to sanitize. Both hoppers come equipped with an counter-balanced lid that is safety interlocked. The unique, easy to remove figure “8” mixing paddle blends fat to lean faster and easier with the 175 and 180A Mixer/Grinder. The minimum exposed feed screw prevents temperature rise of the product. The result... ground meat that is blended correctly and looks good longer. Both units can be purchased with a 42 or 52 grinding head assembly to fit your production needs. Hollymatic... the name you should think of first for consistent, high quality and high performance Mixer/Grinders that are built to last.

Read More about this and other great products from Hollymatic

175 and 180A Mixer/Grinder Spec Sheet
Hollymatic 3000Hollymatic 3000 Mixer/Grinder

IT'S PERFECT. THE HOLLYMATIC 3000 MIXER/GRINDER FILLS THE GAP BETWEEN TOO BIG AND TOO SMALL.

If your operation is somewhere between a supermarket and a large industrial processor...the Hollymatic 3000 Mixer/Grinder is perfect for you. Output rates can exceed 5,940 lb/hr, with a second cut output rate of up to 65 lb/min through a 1/8" plate (depending on product). Solidly constructed of heavy gauge stainless steel with seam welded corners throughout, the Hollymatic 3000 offers smooth, easy to clean surfaces.
The removable stainless steel mixing arm offers an efficient mix and dispersion of the product and is programmed with an automatic forward-reverse duty cycle. The feed screw channel empties fully without squashing or pulping the product. Stainless steel feed screw, grinding head and adapter ring are standard. Pneumatic foot control is available to assist in filling trays for display. Powered by two independent gear reduction units, the Hollymatic 3000 delivers quiet and continuous, trouble free operation.

Read More about this and other great products from Hollymatic

3000 Mixer/Grinder Spec Sheet
Hollymatic 4000Hollymatic 4000 Mixer/Grinder

Standard Features:

• Open grid lid allows product to be added during operation.
• Safety interlocked counter balanced lid.
• Seamless, fully welded, heavy duty stainless steel construction.
• Stainless steel grinding head and feed screw.
• Safety Interlocked meat deflector.
• Ring removal tool.
• Heavy duty caster for mobility.
• Automatic forward and reverse mixing action.
• 2 speed grinding.
• 2 independent helical gear motors for mixing and grinding.

Read More about this and other great products from Hollymatic
Biro Mini-32 Mixer Meat Grinder from Horizon Bradco Commercial Food Service EquipmentBiro Mini-32 Mixer Meat Grinder

The BIRO MINI-32 Mini Mixer Grinder with Flared Hopper makes it easier than ever to break away from the daily grind. Its 65 lb. capacity accepts full lugs that let you grind only the amounts you need to keep the case full and still keep your grinds as fresh as possible. You can use the same grinder for all of your ground products without having to worry about cross contamination because the MINI-32 is so easy to clean. It’s easy to disassemble, and all of the pieces are light so you can just carry all of them to the sink, wash them up, and go on to the next batch. The MINI-32 is ergonomic so the operator doesn’t have to lift a lug over their head or bend over to fill a tray. Ease of loading is a benefit with the newly designed flared hopper. The 3HP drive motor gives you the power you need to grind fresh ground meat, sausage, or poultry all day. So break away from the daily grind and keep your ground meat as fresh as possible with the BIRO Model MINI-32.

Read More about this and other great products from Biro

Mini-32 Spec Sheet
Biro Model AFMG-24 Mixer Meat Grinder from Horizon Bradco Commercial Food Service EquipmentBiro AFMG-24 Mixer Meat Grinder

The Biro AFMG-24 Mixer Grinder is an ideal mixer grinder for today’s compact supermarket meatroom. Its 5hp/3.7 kW (7.5 hp/5.6 kW optional) auger motor, 145 lbs. (66 kg) hopper, and size 32 head can give you an output of up to 65 lbs. (29 kg) per minute for the productivity you need. For even more productivity, your AFMG-24 can come with an optional meat lug holder (see reverse) and an optional electric or pneumatic footswitch. The heavy duty stainless steel hopper, frame, and legs can stand up to years of daily washdown and still resist corrosion, so your mixer grinder lasts longer, and you get a better return on your investment. Of course, it’s built with the superior engineering you expect from BIRO.

Read More about this and other great products from Biro

AFMG 24 Spec Sheet
Biro Model EMG-32 Ergonomic Mixer Meat Grinder from Horizon Bradco Commercial Food Service EquipmentBiro EMG-32 Ergonomic Mixer Meat Grinder

Raise your meat grinding operations to new heights of productivity, efficiency, and profit with the BIRO EMG-32 Ergonomic Mixer Grinder. The top of the hopper is lowered so that the average operator no longer has to lift a full meat lug above their shoulders to dump it in the hopper, and the grinding head is raised to a height where you don’t have to bend over to fill trays prior to packaging. Just as important, you get all of this without sacrificing the quality of your grind. The auger is parallel to the floor, so the product isn’t compressed too much from being forced uphill, and the typical temperature rise of the product is 0 to less than 4° F (depending on product temperature). This helps ensure maximum shelf life. The twin mixing paddles give you a fast, even, thorough blend without overworking your product; the auger is fed evenly and smoothly. The EMG-32′s compact size means it fits nicely in today’s smaller, more efficient meat rooms, so that you can continue to maintain a high level of productivity in minimum space. Of course, all of this comes with the superior BIRO design and reliability you’ve come to depend on.

Read More about this and other great products from Biro

EMG 32 Spec Sheet
Biro Model AFMG-48 Mixer Grinder from Horizon Bradco Commercial Food Service EquipmentBiro AFMG-48 Mixer Meat Grinder

The BIRO Model AFMG-48 is a workhorse mixer grinder for the medium volume meat operation. Its 7.5 hp (5.6 kw) auger motor and size 32 head can give an output of over 65 pounds (30 kg) per minute for the productivity you need. Separate auger and mixer motors mean there is no clutch to wear out or break, which means much lower maintenance costs and higher profits. The single reduction heavy duty roller chain auger drive with tapered roller bearings is the most efficient drive system, so you get maximum power to the auger. The heavy duty stainless steel 200 pound (91 kg) hopper, frame, and legs can stand up to years of daily washdown and still resist corrosion, so your mixer grinder lasts longer and you get a better return on your investment. Power, durability, and low maintenance.

Read More about this and other great products from Biro

AFMG 48 Spec Sheet
Biro Model AFMG-52 Mixer Grinder from Horizon Bradco Commercial Food Service EquipmentBiro AFMG-52 Mixer Meat Grinder

The BIRO Model AFMG-52 is the ideal workhorse mixer grinder for large supermarket meat rooms and medium sized processors and HRI plants. Its 7.5 hp (5.6 kW) motor (or optional 10 hp, 7.5 kW motor) provide an output of up to 100 lbs. (45.5 kg) per minute to give you the productivity you need. The separate auger and mixer motors means there is no clutch to wear out or break, which means much lower maintenance costs and higher profits. The heavy duty roller chain auger drive with tapered roller bearings is separate from the mixer drive, to give maximum power to the auger and more efficiency. The heavy duty stainless steel 200 lb. (90.9 kg) hopper and frame resist corrosion and damage, even in an environment of harsh cleaners. Your mixer grinder lasts longer and gives you more return on your investment. Power, durability, and low maintenance help the BIRO Model AFMG-52 Mixer Grinder work harder so you don’t have to.

Read More about this and other great products from Biro

AFMG 52 Spec Sheet
Biro Model AFMG 52-4 from Horizon Bradco Commercial Food Service EquipmentBiro AFMG-52-4 Mixer Meat Grinder

The BIRO Model AFMG-52-4 is the ideal workhorse mixer grinder for larger supermarket meat room processors and HRI plants. Its 10 hp (7.5 kw motor) provides an output of up to 100 lbs. (45.5 kg) per minute. The separate auger and mixer motors means there is no clutch to wear out or break, which means much lower maintenance costs and higher profits. The heavy duty roller chain auger drive with tapered roller bearings is separate from the mixer drive, to give maximum power to the auger and more efficiency. The heavy duty stainless steel 400 lb. (182 kg) hopper and frame resist corrosion and damage, even in an environment of harsh cleaners. Your mixer grinder lasts longer and gives you more return on your investment. Power, durability, and low maintenance.

Read More about this and other great products from Biro

AFMG 52-4 Spec Sheet
Biro Model AFMG-56-4 Mixer Meat Grinder from Horizon Bradco Commercial Food Service EquipmentBiro AFMG-56-4 Mixer Meat Grinder


With the BIRO Model AFMG-56-4 Mixer Grinder you can start increasing the output of your grinding operation without having to spend a fortune to do it. The 400 lb. (182 kg) hopper gives you the kind of capacity you need, and the 15 hp (11.2 kw) auger motor gives you the power you need. The 5 hp (3.7 kw) mixer motor is heavy enough that it won’t bog down with a full hopper, and the twin mixing paddles give you a quick, thorough mix. The machine has watertight controls and TEFC motors so you can do a full washdown cleanup. The hopper, frame, paddles, bowl, ring, and auger are all constructed of heavy duty stainless steel so it resists damage and corrosion. As with all BIRO designed and built machines, you get the benefit of over 80 years of engineering experience in building meat processing equipment.

Read More about this and other great products from Biro

AFMG 56-4 Spec Sheet
Biro Model AFMG-56-Mk-III Mixer Grinder from Horizon Bradco Commercial Food Service EquipmentBiro AFMG-56-MKIII Mixer Meat Grinder

With the BIRO Model AFMG-56 Mk III Mixer Grinder you can start increasing the output of your grinding operation without having to spend a fortune. The 800 lb. (362.9 kg) hopper gives you the kind of capacity you need, and the 20 hp (15 kW) auger motor gives you the power you need. The 5 hp (3.7 kW) mixer motor is strong enough that it won’t bog down with a full hopper, and the twin mixing paddles give you a quick, thorough mix. Safety interlocks and a pneumatic lift for the lid help ensure safety, and the machine has watertight controls and TEFC motors so you can do a full washdown cleanup. The hopper and frame are constructed of heavy duty stainless steel so it resists damage and corrosion. As with all BIRO designed and built machines, you get the benefit of over 90 years of engineering experience in building meat processing equipment.

Read More about this and other great products from Biro

AFMG 56-MKIII